EasyManua.ls Logo

RIPSpeed DVD-732B - Specifications

RIPSpeed DVD-732B
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25
Specifications
General
Power supply: 12VDC (11V-16V), Test voltage 14.4V, negative ground
Maximum power output: 45W x 4 channels
Continuous power output: 20W x 4 channels (4 10% T.H.D.)
Suitable speaker impedance: 4-8ohm
Pre-Amp output voltage: 2.0V (CD play mode: 1KHz, 0dB, 10K
load)
Fuse: 15A
Dimensions (WxHxD): 178 x 50 x 166mm
Weight: 1.7kg
Aux-in level:
500mV
Sub-out: 2.0V (CD play mode: 61Hz, 0dB, 10K
load)
3 Inch (16:9) TFT LCD
Display resolution (dot)
960(W)×240(H)
Active area (mm)
65.52×36.84
Screen size (inch) 2.96 (Diagonal)
Dot pitch (mm)
0.06825 x 0.1535
Contrast ratio 300
Brightness 350nits
FM Stereo Radio
Frequency range:
87.5-108.0MHz (Europe)
87.5-107.9MHz (America)
Usable sensitivity: 8dB
μ
Frequency response: 30Hz-15KHz
Stereo separation: 30dB(1KHz)
Image response ratio: 50dB
IF response ratio: 70dB
Signal/noise ratio: >55dB
AM(MW) Radio
Frequency range 522-1620KHz (Europe)
530-1710KHz (America)
Usable sensitivity (S/N=20dB) 30dBμ
Disc Player
System: Disc digital audio system
Frequency response: 20Hz - 20KHz
Signal/noise ratio: >80dB
Total harmonic distortion: Less than 0.20% (1KHz)
Channel separation: >60dB
Video signal format system: NTSC/PAL/AUTO
Video output: 1
0.2V
Components
Mounting sleeve 1
Machine screws M5x6 mm 4
Mounting bolt (50 mm) 1
Wire connector 1
Removable face plate case 1
Trim plate 1
Removal
key 2
Operating Instructions 1
Rubber cushion 1
Remote control 1
Note:
Specifications and the design are subject to
change without notice due to improvements.

Related product manuals