mode selection
wheel:
in.mix icon
synchronization/
desynchronization icon
colour mode
(only available if in.mix is detected among the spa accessories)
To select the colour mode, slide the left wheel up or down until the in.mix icon menu is highlighted in the
middle.
In the colour page you can access the following:
• zone selection • synchronizing zones
• changing colours • intensity
• on/off
zone selection
To select a zone, turn the right wheel until the
desired icon is highlighted in the middle.
This selection allows you to modify its colour.
changing colors
Once a zone has been selected, use the colour
wheel to choose the desired color or the rainbow
icon to get changing colours.
on/off
There are two
ways to turn in.mix on or off. The
first one is by using the Light icon on the SPA
Screen. The second way is by touching the light
bulb icons located each side of the intensity bar.
synchronizing zones
The synchronization/desynchronization icon
allows you to match the colour of the selected zone
with the other zones.
intensity
Located at the bottom of the screen, the slider
allows you to modify the intensity of the colour.
zone 3
zone 2
zone 1
off intensity on
colour wheel rainbow icon
in.mix functions
To Next Page
Loading...
