Risco RVCM52E User Manual

10
Defining Camera Trigger Settings
Any event from the following list can be defined to trigger an alarm.
Partition Events
Fire Alarm Panic Alarm Medical Alarm Alarm
Full Arm Part Arm Disarmed Duress
Tamper 24 HR-X Alarm Water Alarm Gas Alarm
Environ. Alarm No Motion Alarm Exit Alarm Low Temperature
Detector Events
Alarm Zone Bypassed Zone Un-bypassed Zone Tamper
To define camera trigger settings:
1. From the Control Panel Cameras page, click the Triggers tab, the Camera
Triggers List page is displayed.
Figure 10 Camera Triggers List
2. Click Add Trigger; the Add Triggers dialog box appears.
Figure 11 Add Trigger

Risco RVCM52E Specifications

General

Brand	Risco
Model	RVCM52E
Category	IP Camera
Language	English