Image adjustment
There are three ways to adjust 4 colors image position as follows.
1) Image adjustment with scanner and PC
2) Manual image adjustment with PC
3) Temporary image adjustment on HC5500
After replace Print Head, it is usually necessary to adjust image position.
If you know how to use “Temporary image adjustment”, it is needless to bring PC and scanner to your customer.
In next page, “Temporary image adjustment” is explained as three steps.
1) B2B image adjustment
2) Vertical image adjustment
3) Over lap of Head adjustment
There is a knack to use it, but if you can use this function well, it is helpful for you
To Next Page
Loading...
