Need help?Do you have a question about the Ritmo MUSTANG 160 V1 and is the answer not in the manual?
Guidelines for managing pipes and couplings at near-ambient temperature before and during welding.
Instructions for preparing pipe ends and cleaning the coupling before welding.
Essential use of an aligning device for stable positioning during welding and cooling phases.
Protecting the welding area and complying with timing recommendations for cooling phase completion.
Description of the control panel layout, including indicator lights and buttons.
Ensuring correct electric protection, power supply voltage, and suitable extension cables for operation.
Verifying cable insulation, laying conditions, and machine housing insulation and stability.
Checking connector pins, cables, probe, display, and mechanical structure for proper function and condition.
Verifying the integrity of the mains power supply as a first step in troubleshooting.
Checking the integrity of the electric power cables for faults during operation.
General| Input voltage | 230V |
|---|---|
| Input Frequency | 50/60 Hz |
| Welding current range | 10-160 A |
| Open circuit voltage | 65V |
| Protection class | IP21S |
| Insulation class | H |
| Efficiency | 85% |
| Power Factor | 0.73 |
| Weight | 4.5 kg |
| Welding process | MMA |
| Duty cycle | 60% @ 160A |
To Next Page
