Need help?Do you have a question about the Ritmo BASIC 355 V0 and is the answer not in the manual?
Detailed explanation of the welding cycles.
Step-by-step guide for welding between clamps 2 and 3.
Step-by-step guide for welding between clamps 3 and 4.
Detailed steps for the simple pressure welding cycle.
Detailed steps for the dual pressure welding cycle.
Warnings related to electrical hazards.
Specific electrocution hazards and precautions.
Hazards related to crushing during machine operation.
Hazards associated with the facer cutting action.
Hazards related to flying splinters from the facer.
Hazards from moving machinery and loose clothing.
Formulas for calculating welding parameters for PE 80 pipes.
Formulas for calculating welding parameters for PE 100 pipes.
Formulas for calculating welding parameters for HDPE pipes.
Formulas for calculating welding parameters for PP pipes.
General| Input voltage | 230V ±15% |
|---|---|
| Open circuit voltage | 65V |
| Protection class | IP21S |
| Weight | 5.2 kg |
| Duty Cycle | 60% @ 160A |
| Efficiency | 85% |
| Power Factor | 0.73 |
| Welding process | MMA |
| Welding current range | 10-160A |
| Output Current Range | 20-160A |
To Next Page
