5
Features:
·Midway mode.
·Quick selection for the gate open/close direction
·Reliable rolling code technology for remote control
·Emergency release key in case of power failure
·Stop in case of obstruction during gate opening
·Reverse in case of obstruction during gate closing
·Built in adjustable auto-close (none, 30, 60, 90
seconds)
·Built in max. Motor Running Time (MRT) for multiple
safety protection (90 seconds)
·Reliable electromagnetism limit for easy adjustment
·Can be equipped with a wide range accessories
·Easy to install, and minimum maintenance
requirement
Installation Overview
Installation of the Opener
Caution:
*Be sure that the opener is installed in
a level and paralleled position and is
properly secured. Improper installation
could result in property damage,
severe injury, and/or death.
* Before starting installation, ensure
that there is no point of friction during
the entire movement of the gate and
there is no danger of derailment.
* Ensure that the safety side panels are
present.
Necessary Tools: The following tools
may be necessary to install the Gate
opener. Screwdrivers, an electric hammer,
wire cutters and a wire stripper, a socket set.
To Next Page