To Next PageTo Next Page
Need help?Do you have a question about the Rittal PDU metered Series and is the answer not in the manual?
General| Current Monitoring | Yes |
|---|---|
| Voltage Monitoring | Yes |
| Power Monitoring | Yes |
| Energy Monitoring | Yes |
| Network Interface | Ethernet |
| Frequency | 50/60 Hz |
| Product Type | PDU metered |
| Mounting Type | Rack-mounted |
| Phase | Single-phase or Three-phase |
| Protocols | SNMP, HTTP |
| Input Current | 16 A, 32 A |
| Output Voltage | 230 V |
| Communication Interface | RJ45 |
| Humidity | 5% to 95% non-condensing |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Metering Type | Per-outlet or total PDU metering (depending on model) |
Specifies the intended use and deployment locations for the PDU.
General warnings regarding product handling, operation limits, and contact.
Lists related documents available for further information and technical data.
Emphasizes the importance of keeping documents accessible for personnel.
Details the four design variants of the PDU and their features.
Describes where and how the PDU is intended to be used.
Outlines the conditions under which the PDU can be operated.
Provides instructions and recommendations for mounting the PDU.
Identifies and explains the PDU's operating and display components.
Instructions for configuring the PDU using its built-in display.
Lists general technical data, operating ranges, and conformity standards.
Explains the coding system for identifying different PDU model variants.
Provides contact details for technical questions and service requests.
