To Next PageTo Next Page
Need help?Do you have a question about the Rittal VX25 Series and is the answer not in the manual?
General| Material | Sheet steel |
|---|---|
| Protection category | IP55 |
| IK Code | IK10 |
| Color | RAL 7035 |
| Door Opening Angle | 130° |
| Surface finish | Dipcoat primed, powder-coated |
| Frame width | Varies by model (e.g., 600 mm, 800 mm, 1000 mm, 1200 mm, etc.) |
| Mounting | Varies by model and accessories (e.g., floor mounting, wall mounting) |
| Operating Temperature | Up to 70 °C |
| Dimensions | Varies depending on the model. Refer to specific model datasheet. |
| Weight | Varies depending on the model. Refer to specific model datasheet. |
| Hinges | 180° hinges |
| Lock | Comfort handle with lock insert |
Description of the baying enclosure VX25, its suitability and protection.
Requirements for the installation site regarding temperature, humidity, and environment.
Instructions for removal and installation of the mounting plate.
Steps for moving the mounting plate to different positions.
Instructions for earthing and potential equalisation connections.
Securing the enclosure in case of dynamic load during transport.
