To Next Page
S
Scott MunozSep 10, 2025
What to do if Rivacold Fan has connecting rod assembly worn?
- DDaniel ClarkSep 10, 2025
If the connecting rod assembly, bearings or segments of your Rivacold Fan are worn, inspect and replace worn components.
What to do if Rivacold Fan has connecting rod assembly worn?
If the connecting rod assembly, bearings or segments of your Rivacold Fan are worn, inspect and replace worn components.
What happens if Rivacold FAH003Z001 Fan has lack of refrigerant?
If there is a lack of refrigerant in your Rivacold Fan, recharge the system with the appropriate refrigerant.
What to do if Rivacold FAH003Z001 condenser is dirty?
If the condenser of your Rivacold Fan is dirty inside or outside, clean it to ensure efficient operation.
What to do if Rivacold FAH003Z001 suction filter is clogged?
If the suction filter of your Rivacold Fan is clogged, clean or replace it.
What to do if Rivacold Fan has insufficient air flow to the air-cooled condenser?
If there is insufficient air flow to the air-cooled condenser of your Rivacold Fan, ensure adequate airflow to the condenser.
What to do if Rivacold FAH003Z001 LP pressure switch is incorrectly adjusted?
If the LP pressure switch of your Rivacold Fan is incorrectly adjusted, adjust the LP pressure switch to the correct setting.
What to do if Rivacold FAH003Z001 Fan refrigerating unit is incorrectly set?
If your Rivacold Fan refrigerating unit is incorrectly set, set the refrigerating unit according to the specifications.
What to do if Rivacold FAH003Z001 HP pressure switch is incorrectly adjusted?
If the HP pressure switch of your Rivacold Fan is incorrectly adjusted, adjust the HP pressure switch to the correct setting.
What to do if Rivacold FAH003Z001 has ice formed on expansion valve needle?
If ice has formed on the expansion valve needle of your Rivacold Fan, defrost the expansion valve needle.
What to do if Rivacold FAH003Z001 has excess refrigerant?
If there is excess refrigerant in your Rivacold Fan, remove the excess refrigerant from the system.
General| Model | FAH003Z001 |
|---|---|
| Category | Fan |
| Brand | Rivacold |
| Diameter | 300 mm |
| Voltage | 230 V |
How to install the plug-in version of the Blocksystem unit.
How to install the saddle version of the Blocksystem unit.
Procedures for safely connecting the Blocksystem unit to the electrical supply.
Overview of the control panel keys and indicator lights.
How to turn the Blocksystem unit on and off.
How to set and adjust the desired room temperature.