To Next Page
M
markevansSep 1, 2025
What to do if Rivacold FAH003Z001 has ice formed on expansion valve needle?
- GGregory KelleySep 1, 2025
If ice has formed on the expansion valve needle of your Rivacold Fan, defrost the expansion valve needle.
What to do if Rivacold FAH003Z001 has ice formed on expansion valve needle?
If ice has formed on the expansion valve needle of your Rivacold Fan, defrost the expansion valve needle.
What to do if Rivacold Fan has unsealed discharge valve?
If your Rivacold Fan has unsealed discharge valve, replace or repair discharge valve to ensure proper sealing.
What to do if Rivacold FAH003Z001 has excess refrigerant?
If there is excess refrigerant in your Rivacold Fan, remove the excess refrigerant from the system.
What to do if Rivacold Fan gauge is not set?
If the gauge of your Rivacold Fan is not set, set the gauge correctly as per the manual.
What to do if Rivacold FAH003Z001 has by-pass shut off valve opened?
If the by-pass shut off valve of your Rivacold Fan is opened or the rupture disk is perforated, check and replace the by-pass shut off valve or rupture disk.
What to do if Rivacold FAH003Z001 evaporator fan motor is not working?
If the evaporator fan motor(s) of your Rivacold Fan are not working, inspect and repair or replace the fan motor as needed.
What to do if Rivacold FAH003Z001 Fan has closed solenoid valve?
If there is a closed solenoid valve on the liquid line of your Rivacold Fan, open the solenoid valve on the liquid line.
What to do if Rivacold Fan has insufficient air flow to the air-cooled condenser?
If there is insufficient air flow to the air-cooled condenser of your Rivacold Fan, ensure adequate airflow to the condenser.
What to do if Rivacold FAH003Z001 suction filter is clogged?
If the suction filter of your Rivacold Fan is clogged, clean or replace it.
What to do if Rivacold FAH003Z001 condenser is dirty?
If the condenser of your Rivacold Fan is dirty inside or outside, clean it to ensure efficient operation.
How to install the plug-in version of the Blocksystem unit.
How to install the saddle version of the Blocksystem unit.
Procedures for safely connecting the Blocksystem unit to the electrical supply.
Overview of the control panel keys and indicator lights.
How to turn the Blocksystem unit on and off.
How to set and adjust the desired room temperature.
General| Model | FAH003Z001 |
|---|---|
| Category | Fan |
| Brand | Rivacold |
| Diameter | 300 mm |
| Voltage | 230 V |