To Next Page
S
Steven GoldenSep 2, 2025
What to do if my Rivacold Air Conditioner has a dirty filter on oil return?
- MMichael CrossSep 2, 2025
If the filter on oil return is dirty in your Rivacold Air Conditioner, clean or replace it.
What to do if my Rivacold Air Conditioner has a dirty filter on oil return?
If the filter on oil return is dirty in your Rivacold Air Conditioner, clean or replace it.
What to do if my Rivacold Air Conditioner has a lack of refrigerant?
If your Rivacold Air Conditioner is experiencing a lack of refrigerant, the suggested solution is to add refrigerant to the system.
What to do if my Rivacold Air Conditioner has clogged discharge pipes?
If your Rivacold Air Conditioner has clogged discharge pipes, clean the clogged discharge pipes.
What to do if my Rivacold Air Conditioner has suction pipes not correctly insulated?
If the suction pipes of your Rivacold Air Conditioner are not correctly insulated, insulate them correctly.
What to do if my Rivacold Air Conditioner has inadequate cooling water flow?
If your Rivacold Air Conditioner has inadequate cooling water flow, check and improve the cooling water flow.
What to do if my Rivacold Air Conditioner has excess refrigerant?
If your Rivacold Air Conditioner has excess refrigerant, remove the excess refrigerant from the system.
What to do if my Rivacold Air Conditioner has an expansion valve failure?
If your Rivacold Air Conditioner's expansion valve has failed, replace it.
What to do if my Rivacold Air Conditioner has clogged liquid pipes?
If the liquid pipes in your Rivacold Air Conditioner are clogged, clean them.
What to do if my Rivacold Air Conditioner has ice formed on expansion valve needle?
If ice has formed on the expansion valve needle of your Rivacold Air Conditioner, remove the ice.
What to do if my Rivacold Air Conditioner has a clogged suction filter?
If your Rivacold Air Conditioner's suction filter is clogged, you should clean or replace it.
General| Brand | Rivacold |
|---|---|
| Model | FSL012Z011 |
| Category | Air Conditioner |
| Language | English |
Provides detailed steps for installing the condensing unit and evaporator, including mounting and connections.
Procedures for safe and correct electrical connection, including earthing and wiring requirements.
Importance and step-by-step procedure for setting vacuum in the refrigerating system.
Procedures and safety recommendations for charging the system with the correct type of refrigerant.
Methods and importance of checking for refrigerant leaks, especially with new gas types.
Procedure for accessing and adjusting the setpoint for coldroom temperature control.
Error related to the cold room temperature probe, affecting compressor and defrosting.
Error detected during the end of defrosting phase, potentially due to timeout.
Step-by-step guide for activating the emergency system when the control unit fails.
Procedures for checking refrigerant flow and detecting leaks, with frequency guidelines.
