8
2
1
CARE AND CLEANING
Follow this procedure monthly to avoid mineral deposits and buildup, which can affect
the steaming performance of the unit.
Make sure unit is unplugged and has
cooled completely. Push in tabs on
both sides and pull to remove hose
from unit.
Empty remaining water from tank
over sink using the fill/drain hole. Tilt
unit back 90°; then empty again,
repeating process until all water is
removed from tank.
4
3
Mix a solution of one cup white
vinegar and one cup water.
Slowly pour the solution into the
water tank fill opening. Reattach
hose to base.
1 Cup
(250 ml)
White
Vinegar
1 Cup
(250 ml)
Water
6
5
Turn the unit ON and let the liquid
solution steam out of the steam
handle/nozzle.
Repeat this process with clean water
until vinegar odor is no longer
present.
840193801 ENv05.qxd:840135000 Ev00.qxd 11/19/10 9:26 AM Page 8
To Next Page
Loading...
