STEP 6
STEP 6
10
Tighten Tension Strap
6
Place River Quiver back on vehicle aligning each Quick
Release Mount with the cross bars. Adjust the tension
bolt for each tension strap with 4mm hex wrench until
you are able to turn down each latch tab with secure
tension around the cross bars. After fully securing each
Quick Release Mount tension strap, lock the locking
mounts with key provided.
Once installed check for security and
function of River Quiver.
• DO NOT OVERTIGHTEN OR DAMAGE
WILL OCCUR
!
TIGHTEN QUICK RELEASE MOUNT TENSION STRAP
Latch Tab
To Next Page
Loading...