17
OPEN THE HOOD IF 12-VOLT POWER ISN'T WORKING
If you can't open the hood normally but you have time, use the
manually open the hood procedure.
If you don't have time, open the hood quickly using this procedure.
1. Insert the halligan bar between the lower edge of
the hood and the top of the light strip below the
hood ornament and pry it open slightly.
2. Insert the hydraulic spreader and break the hood
latch.
3. Lift the hood and follow the Disconnect the
High-Voltage - Front procedure.
DISCONNECTTHEHIGHVOLTAGE
To Next Page
Loading...
Need help?
General
