8. PARAMETER DESCRIPTION
IMR02C15-E4
8-132
Dummy
F52
ST start condition
Timing (starting condition) to activate the Startup tuning (ST) function is
selected.
Data range Factory set value
0: Activate the ST function when the power is
turned on; when transferred from STOP to
RUN; or when the Set value (SV) is changed.
1: Activate the ST function when the power is
turned on; or when transferred from STOP to
RUN.
2: Activate the ST function when the Set value
(SV) is changed.
0
Related parameters
Parameter setting mode:
• Startup tuning (ST) (P. 8-25)
For details of Startup tuning (ST), refer to 6.3 Startup Tuning (ST)
(P. 6-11).
STS
To Next Page
Loading...
Need help?
General
