8. PARAMETER DESCRIPTION
IMR02C15-E4 8-57
8.5.3 Engineering setting item
Function block 00 (F00)
This is the first parameter symbol of Function block 00 (F00).
F00
Set lock level
Lock and protect set data of parameters in each parameter group.
Data range Factory set value
0: All parameters can be changed
1: Lock “Parameter Group” F01 through F10
2: Lock “Parameter Group” F02 through F10
3: Lock “Parameter Group” F03 through F10
4: Lock “Parameter Group” F04 through F10
5: Lock “Parameter Group” F05 through F10
6: Lock “Parameter Group” F06 through F10
7: Lock “Parameter Group” F07 through F10
8: Lock “Parameter Group” F08 through F10
9: Lock “Parameter Group” F09 and F10
10: Lock “Parameter Group” F10
0
Related parameter
Mode switching:
• Set data unlock/lock transfer (P. 8-10)
Description of function
The same parameters exist in Parameter setting mode and Engineering mode F01 to F10. Parameters
are grouped into F01 to F10 blocks to lock set data per related parameters. Set data is locked by
Setting data unlock/lock transfer in each Function blocks from F01 to F10. The same parameters will
also be locked in Parameter setting mode.
For details of setting method, refer to 6.6 Protecting Setting Data (P. 6-24).
F00.
LOcK
To Next Page
Loading...
Need help?
General
