RoadHawk Vision - Safety and Handling Precautions; General Usage Warnings; MicroSD Card Care and Safety

• Do not drop the product as this could cause damage or malfuncon and is not covered by warranty.
• Do not place near magnets as this could cause the device to malfuncon or operate erracally.
• Sudden changes of brightness such as entering or exing a tunnel may cause a temporary
loss in video quality.
• Camera lens should be kept clean. An unclean lens could negavely aect video quality.
• Aach the product in the recommended place. Installing in an obscure place could cause the
image to become skewed.
• Do not disassemble, repair or aempt to modify the camera as this could cause malfuncon
or injury and any damage will not be covered under warranty.
• Do not place near the eecve range of an air bag as this may cause malfuncon of the airbag.
• Keep the power socket clean of dust as this could result in a poor connecon and a malfuncon.
• Do not operate the product whilst driving as this could cause an accident. Stop in a safe place
if you need to operate the camera.
• Do not pull on the power cable. Remove by holding the plug and pulling gently.
• Never use a damaged cable.
• Do not clean exterior with alcohol, volale or oily solvents as this could cause deformaon of
the surface and a malfuncon.
• Aach the product on the front window rmly. Before xing, ensure that your windscreen is
cleaned as the mount could become detached due to temperature, humidity, dust, shock.
• IMPORTANT: We do not take responsibility for data loss or damage caused by the
malfuncon of MicroSD cards.
• Please use authenc MicroSD cards as the manufacturers of the camera do not take
responsibility for data loss.
• Do not put foreign substances into the MicroSD card slot as this could cause a malfuncon
or problems inserng the MicroSD card in future.
• Do not touch the MicroSD card with wet or oily hands as this may cause malfuncon due to
card damage.
• Ensure the card is the correct way up before inserng. If the MicroSD card is not fully
inserted then the camera cannot record data.
• Push the MicroSD card in fully. Do not force the MicroSD card into the slot.
• Before removing the SD card, please check the ‘power o’ status. If you pull the MicroSD
card out during ‘power on’ status, it may cause malfuncon or data loss. The camera will
chime aer the power is removed to let you know it is safe to remove the MicroSD Card.
• MicroSD cards are consumables. MicroSD cards do not last forever and should be checked
regularly. MicroSD cards are not covered by our 2 year warranty.
• Use a secure case for storing MicroSD cards as data may be damaged by stac while storing
or moving.
• In case of important data, please make sure you back up your MicroSD Card as data may be
lost aer long term usage.
• Please check and backup the data stored on your MicroSD card. We recommend formang
the MicroSD card regularly.
• Do not disassemble, modify or drop your MicroSD card as this may cause serious damage
and result in a loss of data.
• This product supports up to 128GB MicroSD XC memory cards. We recommend using class 6
memory cards, at least.
• Do not buy cheap memory cards. Substandard MicroSD cards are the most common cause
of camera malfuncon.
• The camera may become warm during normal operaon. This is perfectly normal.
• Do not leave the camera in a very hot car during the dayme.
• It is advisable to remove the camera from the vehicle when not in use to deter thieves.
CAUTION
5 6