Roadmaster ENZO 8 - Operation: Scooter Controls; Operating the Scooter; Forward, Reverse, and Braking Control; Indicator and Horn Usage

4. OPERATION
11
4.2 HOW TO OPERATE YOUR SCOOTER
Turn the key to power ON or OFF
» (ON) : Power is turned on
» (OFF) : Power is turned o
SPEED DIAL
Turn this dial to determine the speed range of the scooter. Turn the dial anti-clockwise to go slower
and clockwise to go faster.
FORWARD, REVERSE, AND BRAKING
» Push the speed control lever forwards with your right thumb and the vehicle will move forward.
» Push the speed control lever forwards with your left thumb and the vehicle will move backward.
» The horn will beep when the vehicle is in reverse.
» Release the speed control lever freely while either going forward or reverse, and the electromagnetic
brake in the motor will be activated, and the vehicle will stop.
INDICATOR LAMP SWITCH
» The light will ash and buzzer will make a beeping sound when turning the switch to the left or
right.
» Return the switch back to the middle. The indicator will be cancelled.
HORN BUTTON
Press the horn button to sound the horn. Release the button to stop the horn.
TEMPERATURE SENSOR
The Temperature Sensor is built in to the control panel. Temperature given is for reference only.