6 INSPECTION AND MAINTENANCE
19
6.3 BATTERY, FUSE AND TYRE
BATTERY
Refer to the section entitled BATTERY on page 15.
FUSE
If the battery charger is turned on and no LEDs are lit, check the fuse.
TYRES
The condition of the tyres depends on how you drive and use your scooter.
» Please check the tread depth regularly. Replace the tyres when the tread depth is less than 0.5
mm.
SUGGESTION
Ask for help from your scooter dealer to inspect or replace the fuse, since the tiller
shroud has to be removed rst before you can replace the fuse.
ATTENTION
» When tread depth is below 0.5mm it can easily lead to vehicle slippage, making
braking
distances longer. Replace the tyres as early as possible when they do not
have insucient
tread depth.
» The tyre pressure should be kept at about 26 PSI (approx. 1.8KG/cm) for the best
ride and handling.
ATTENTION
When conducting maintenance of your vehicle, please turn the power switch to OFF and
remove the charger cords.
To Next Page
Loading...