Roadmaster ENZO 8 - Inspection and Maintenance: Storage and Moving; Scooter Cleaning Recommendations; Proper Scooter Storage; Safe Scooter Moving Procedures

To Next Page

To Previous Page

6. INSPECTION AND MAINTENANCE

6.4 STORAGE

Make sure the vehicle is stored under the following circumstances:

» Make sure the seat is set in the Forward position.

» Make sure the Power switch is turned to OFF.

6.5 MOVING THE SCOOTER

» Turn the power switch OFF before moving.

» Lift the scooter by the chassis, and not by the bumpers. Lifting the scooter by the bumper could

cause damage or injury.

» For your safety, always ask for help if required. You will need 2 or 3 persons when moving or

lifting the vehicle.

SUGGESTIONS

» Please store the scooter in a location where it is away from the direct sunlight, rain,

or dew. When storing for a long time, please charge the battery to full power and

then disconnect the battery terminal.

SUGGESTIONS

» Do not splash water directly on your scooter to wash it. This could lead to

malfunction of the system electrics.

» Do not use petrol, solvents or vaporising solution as these may deform or damage

the shrouds.

» Do not use wax.