Roadstar CLR-2615 User Manual

1 English
LOCATION OF CONTROLS
1. M BUTTON
2. TUNING DOWN
3. TUNING UP
4. SNOOZE/SLEEP BUTTON
5. VOLUME -
6. VOLUME +
7. CLOCK - RADIO ON/OFF BUTTON
8. PM LED
9. LED DISPLAY
10.ALARM 1 LED
11.ALARM 2 LED
12.LOUDSPEAKER
13.ANTENNA
14.BATTERY FOR MEMORY BACK-UP
15.EXTERNAL POWER TRANSFORMER INPUT
POWER SUPPLY
This unit operates from a main supply of 230V ~ 50Hz with the supplied AC
Transformer Adapter.
Connecting the AC/DC adaptor (included)
1. Insert the DC plug, at the end of the AC/DC adaptor cord, into the DC 9V
INPUT socket (15) located on the back of the unit.
2. Connect the AC/DC adaptor into a 230V ~ 50Hz AC power outlet.
Notes:
 Use only the supplied AC/DC adaptor. Using other types of adaptor may
damage the unit.
 Make sure that the AC/DC adaptor matches with your household voltage
before connecting it into the wall outlet.
 Do not touch the AC/DC adaptor with wet hands.
Battery Back-up Power Failure Protection
This radio has a battery back up circuit that will keep the correct time and
alarm settings in the event of a temporary power interruption.
Install 1x CR2025, not included, into the battery compartment located on the
bottom of the unit.
Note: We recommend an alkaline battery for longer usable life.
Change the battery every 9 to 12 months for best result and avoid possible
battery leakage.
If power is temporarily interrupted the display will blink and the radio will not
play. However, the battery back-up circuit will continue to maintain the clock

Roadstar CLR-2615 Specifications

General

Radio type	Clock
Tuner type	Analog
AM band range	530 - 1600 kHz
FM band range	88 - 108 MHz
PLL synthesizer	-
Supported radio bands	AM, FM
RMS rated power	- W
Display type	LCD
Backlight color	Blue
Display diagonal	1.2 \
Product color	Black
Input voltage	230 V
Apple docking compatibility	Not supported
Battery voltage	9 V
Battery life (max)	24 h
AC input frequency	50 Hz