Roadstar HIF-8892EBT - Aux in Operation; Usb Operation; Bluetooth Operation; Repeat - Random Mode

6 English
AUX IN OPERATION
1. Select “AUX” mode by pressing the [MODE] button (2) repeatedly;
2. Use one male to male 3.5mm jack cable (not included) to connect any external
audio device to the [AUX-IN SOCKET] (5).
Note: Music control (play, pause, etc) must be done from your external device.
USB OPERATION
1. Select “USB” mode by pressing the [MODE] button (2) repeatedly;
2. Plug an USB stick into the [USB PORT] (3);
3. Playback will start automatically from the first track.
Note: Some mp3 player may not be able to play via the usb socket. this is not a mal-
function of the system.
Note: To avoid damage to USB memory, remove it only when the radio is OFF.
SD OPERATION
1. Select “SD” mode by pressing the [MODE] button (2) repeatedly;
2. Plug a SD card into the [SD PORT] (4);
3. Playback will start automatically from the first track.
Note: To avoid damage to the memory, remove it only when the radio is OFF.
BLUETOOTH OPERATION
1. Select “BT” mode by pressing the [MODE] button (2) repeatedly;
2. Connect your Bluetooth portable device to the ID Bluetooth tagged as “HIF-
8892EBT”;
3. You can now transfer the music to the HIF-8892EBT.
Note: Music control (play, pause, etc) must be done from your external device.
REPEAT - RANDOM MODE
During playback, press repeatedly the [PLAY MODE] (16) to select:
 REP-ONE: The current track is played repeatedly.
 REP-FOLDER: The current folder is played repeatedly.
 REP-ALL: All tracks are played repeatedly.
 RANDOM: Tracks are played randomly.
 INTRO: All tracks are played for 10 seconds.