If the display flashes alternately with the heat setting
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you’re using is not suitable for induction cooking or,
• the pan is too small or not properly centred on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 1 minutes if no suitable pan is placed on it.
When you have finished cooking
1.Turn the cooking zone off by touching the "-" or sliding along the "---" to the left side,
and then hold for 1 second.
2.Make sure the display shows”0”,then show”H”.
3
.T
urn
t
he whole cooktop o
ff
by
t
ouching
t
he
O
N
/OFF
con
t
rol
.
4.Beware of hot surfaces “ H ” will show which cooking zone is hot to touch. It will
disappear when the surface has cooled down to a safe temperature. It can also be used
as an energy saving function if you want to heat further pans, use the hotplate that is still
To Next Page
Loading...