12
1. Touch the ON/OFF control.
After power on, the buzzer beeps once, all displays
show “ – “ or “ – – “, indicating that the induction
hob has entered the state of standby mode.
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the surface
of the cooking zone are clean and dry.
3. Touching the heating zone selection control , and
an indicator next to the key will flash.
4.Select a heating zone and set a power level by touching the slider,or the"+" or "-" control,
or just touch any point of the "---"
a.If you don't set the power within 1 minute,the induction hob will automatically swith off.
You will need to start again at step 1.
b.You can modity the heating setting at any time during cooking (But pls select the
heating zone first which you want to choose)
c.If slide along the "---",power will vary form level 1 to level 9.
To Next Page
Loading...