T
r
oubl
es
hoo
t
ing
If an abnormality comes up, the induction hob will enter the protective state automatically
and display corresponding protective codes:
Temperature sensor of the induction
coil failure
Please contact the supplier.
Temperature sensor of the IGBT
failure.
Please contact the supplier.
Please inspect whether power
supply is normal.
Power on after the power
supply is normal.
High temperature of the induction coil
temperature sensor
Please contact the supplier.
High temperature of the IGBT
temperature sensor
Please restart after the hob cools
down.
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages to the
induction hob.
To Next Page
Loading...