Fan noise coming
from the induction
hob.
A cooling fan built into your
induction hob has come on
to prevent the electronics
from overheating. It may
continue to run even after
you’ve turned the induction
hob off.
This is normal and needs no
action. Do not switch the power to
the induction hob off at the wall
while the fan is running.
Pans do not become
hot and appears in
the display.
The induction hob cannot
detect the pan because it
is not suitable for
induction cooking.
The induction hob cannot
detect the pan because it is
too small for the cooking zone
or not properly
centred on it.
Use cookware suitable for
induction cooking. See section
‘Choosing the right cookware’.
Centre the pan and make sure
that its base matches the size of
the cooking zone.
The induction hob or
cooking zone has
turned itself off
unexpectedly, a tone
sounds and an error
code is
displayed(typically
alternating with one
or two digits in the
cooking timer
display)
Please note down the error
letters and numbers ,switch the
power to the induction hob off at
the wall,and contact a qualified
technician.
To Next Page
Loading...