6. When cooking timer expires, the corresponding cooking zone will be
switch offautomatically and will show “H”
Other cooking zone will keep operating if they are turned on previously.
Setting the timer to turn more than one cooking zone off
If you use this function on more than one heating zones, the timer indicator
will
show the
shortest
time.
(e.g.
zone #1 setting time of 2 minutes and zone #2 setting time of 5 minutes,
the
timer
indicator shows
“2”.
)
NOTE: The flashing red dot next to power level indicator means the timer indicator is showing
time of the heating zone.
If you want to check the set time of other heating zones, touch the heating zone slide control
once,The timer will indicate its set
time.
(set to 6 minutes)
(set to 3 minutes)
2. When cooking timer expires,the corresponding heating zone will be automatically
switched off and show “H”
NOTE:If you want to change the time after the timer is set,you have to shart
from step1.
To Next Page
Loading...