ROBBE Power Peak B7 EQ-BID - User Manual

Bedienungsanleitung
Operating instructions
Notice d’utilisation
Manuale d’istruzione
Manual de Uso
Návod k obsluze
Power Peak
®
B7 EQ-BID
No. 8566

Summary

Controls

Function of Controls

Explains the functions of the MODE, '+/-', EDIT/ENTER, and VIEW buttons for operating the charger.

Using the Charger for the First Time

Working Display Overview

Connecting Batteries and Equalizer

Provides instructions for correctly connecting battery packs and the equalizer lead.

Programming Mode

Programming Mode Menu Structure

Illustrates the menu flow for programming battery memories and settings.

Settings in Programming Mode

Starting Charge;Discharge Process

BID Chip; Key

Using a BID Chip or Key

Describes the convenience and functionality of using BID chips with the charger.

Menu Structure for Programming a BID Chip; Key

Chip; Key Programming Procedure

Reading Data from a BID Chip; Key

Charge; Discharge Process with a BID Chip; Key

Outlines the process for charging/discharging using a BID chip or key.

End of a Charge; Discharge Process

Error Messages

Safety Notes

Introduction to Batteries

ROBBE Power Peak B7 EQ-BID Specifications

General

Output Current	up to 7A
Charge Power	up to 80W
Discharge Power	10W
Battery Types Supported	NiCd, NiMH, LiPo, LiIo, LiFe, Pb
Number of cells LiPo/LiIo/LiFe	1-6 cells
Balancing Current	300mA
Display	LCD
Input Voltage	100-240V AC
Charge Current	0.1-7A
Discharge Current	0.1-2A
Number of cells NiCd/NiMH	1-10 cells
Discharge Cutoff Voltage	0.5-15V