Need help?Do you have a question about the ROBBE Power Peak C8 EQ-BID and is the answer not in the manual?
Welcomes the customer and introduces the charger.
Provides critical safety advice to read before first use.
Lists all items included in the Power Peak® C8 EQ-BID package.
Details the charger's functions and supported battery types (NiMH, LiPo, etc.).
Explains the BID system for automatic parameter transfer and safety.
Describes the USB socket and its bootloader function for firmware updates.
Explains the operation of the MODE, VIEW, EDIT, '+', '-', and ENTER buttons.
Details the Select Wheel's role and identifies input/output sockets.
Lists operating voltage, cell counts, and physical dimensions.
Covers charge/discharge currents, termination, and protective functions.
Steps for connecting to 12V DC or 230V AC, emphasizing polarity.
Explains the importance and connection of the voltage sensor for Li-batteries.
Details how to interpret battery memory, voltage, current, and capacity.
Explains status indicators (C, D, R, N, F) and memory selection.
Displays input voltage and reconstructs past charge/discharge processes.
Shows battery voltage, energy transferred, and equalizer data.
Displays maximum charged/discharged capacity and charge cycle count.
Shows user-defined date and maximum battery voltage from BID.
Setting up and managing up to five internal battery profiles.
Setting battery type, cell count, capacity, and charge/discharge currents.
Displays user-definable date stored on the BID chip or key.
Adjusts the cut-off tolerance for Lithium battery charging.
Configures volume, melody, and the display language of the charger.
Essential settings required before starting manual charge/discharge.
How to initiate charge, discharge, or cycle modes using the MODE button.
Steps for connecting the BID chip or key to the charger.
Starting charge/discharge using the MODE button with BID data.
Explains how processes end automatically and audible notifications.
Guides on interpreting and clearing error messages like LOW INPUT, OVERHEAT.
A diagram illustrating the charger's menu flow and options.
Covers environmental, operational, and handling safety for the charger and batteries.
Details safety for charging specific battery types and cell matching.
Warnings about high voltage packs and the importance of cable integrity.
Recommended charge rates for NiCd and NiMH battery types.
Safety precautions for Lead-Acid batteries, including gas generation.
Information on Lithium-Ion, LiPo, and LiFe battery types and voltages.
Explains capacity differences and the need for cell balancing.
Explains the 24-month guarantee and the conditions for claims.
Defines approved usage and limits the company's liability for misuse.
Lists various charge leads and accessories for the BID system.
Details adapter cables used for connecting different battery types.
Provides contact information and addresses for service centres globally.
Guidelines for environmentally responsible disposal of batteries and electronics.
Confirms the product's compliance with relevant CE directives.
General| Display | LCD |
|---|---|
| Balance Port | Yes |
| Cooling System | Fan |
| Charging Technology | CC/CV |
| Battery Types Supported | LiPo, NiMH, NiCd, Pb |
To Next Page