Need help?Do you have a question about the Robe Spot 575 XT and is the answer not in the manual?
Essential precautions for safe device operation, installation, and handling.
Precautions for safe electrical connections, grounding, and power handling.
Instructions for safe lamp replacement, fuse use, and initial start-up.
Specific caution regarding potential eye damage from direct light source exposure.
Guidelines for safe rigging, securing the fixture, and handling with care.
Critical warnings about lamp ignition with open covers and UV radiation exposure.
Step-by-step guide for inserting and securing the lamp, including safety warnings.
Instructions for mounting fixtures on a truss using clamps and safety chains.
Important warnings for rigging, including clamp usage and safety chain attachment.
Procedure for connecting multiple fixtures via DMX-512 using XLR and terminators.
Procedure for assigning DMX fixture addresses for controller communication.
Methods for switching the lamp on/off via DMX, including restrike time considerations.
Setting up synchronous operation of multiple fixtures without a controller.
Steps for setting DMX address and master/slave configurations.
Instructions for accessing and using the LAMP menu to switch the fixture lamp on or off.
Procedure for editing or creating programs with step-by-step DMX value adjustments.
Calibrating color and gobo wheels via control board or external controller.
Interpreting 'HEAT' and 'LA.Er' messages related to lamp and temperature issues.
Step-by-step instructions for safely replacing the fixture's fuse.
Instructions for changing power supply settings to match local voltage and frequency.
Essential precautions for safe device operation, installation, and handling.
Precautions for safe electrical connections, grounding, and power handling.
Instructions for safe lamp replacement, fuse use, and initial start-up.
Specific caution regarding potential eye damage from direct light source exposure.
Guidelines for safe rigging, securing the fixture, and handling with care.
Critical warnings about lamp ignition with open covers and UV radiation exposure.
Step-by-step guide for inserting and securing the lamp, including safety warnings.
Instructions for mounting fixtures on a truss using clamps and safety chains.
Important warnings for rigging, including clamp usage and safety chain attachment.
Procedure for connecting multiple fixtures via DMX-512 using XLR and terminators.
Procedure for assigning DMX fixture addresses for controller communication.
Methods for switching the lamp on/off via DMX, including restrike time considerations.
Setting up synchronous operation of multiple fixtures without a controller.
Steps for setting DMX address and master/slave configurations.
Instructions for accessing and using the LAMP menu to switch the fixture lamp on or off.
Procedure for editing or creating programs with step-by-step DMX value adjustments.
Calibrating color and gobo wheels via control board or external controller.
Interpreting 'HEAT' and 'LA.Er' messages related to lamp and temperature issues.
Step-by-step instructions for safely replacing the fixture's fuse.
Instructions for changing power supply settings to match local voltage and frequency.
General| Brand | Robe |
|---|---|
| Model | Spot 575 XT |
| Category | DJ Equipment |
| Language | English |
To Next Page
