Need help?Do you have a question about the Robe ROBIN iForte and is the answer not in the manual?
Covers electrical safety, cooling, power cord, and servicing guidelines.
Warns about direct exposure to the LED source and potential eye injury.
Guidelines for heat, dust, housing, safety wire, and glass cover integrity.
Information on immunity and emission standards for the equipment.
Identifies main parts like Head, Arm, Base, Pan lock, and Tilt lock.
Details NFC point, display, buttons, and connectivity ports on the base.
Emphasizes qualified electricians, IP65 protection, rubber caps, and grounding.
Guides on mains connection, auto-switching power supply, and grounding.
Step-by-step instructions for replacing frost modules.
Detailed guide on replacing gobo modules, including DMX adjustments.
Requirements for safe installation, securing, and working area during rigging.
Instructions for connecting fixtures using DMX cables and setting up a DMX chain.
Configuration for network connectivity using Art-Net protocol and IP addressing.
Guide to using wireless DMX signal transmission and managing connections.
Describes effect wheel, gobos, prisms, frost, iris, zoom, and focus functionalities.
Details the four-shutter framing system and its orientation control.
Explains pan/tilt movement range, speed, and electronic motion stabilizer.
Covers color wheels and CMY+CTO color mixing capabilities.
Provides an overview of the fixture's control menu structure and settings.
Explains the function of ESCAPE, NEXT, PREV, and ENTER buttons.
Defines the meaning of icons used within the touch screen interface.
Information on LED engine types and the fixture's battery charging status.
Procedures for locking/unlocking the screen and initial setup steps.
Setting DMX start address and selecting DMX preset channels.
Managing IP addresses, Net Mask, and network protocols like Art-Net.
Reading total and resatable hours for fixture and LED module operation.
Monitoring internal temperatures and air filter cleaning status.
Details on control modules, product IDs, serial numbers, and installation dates.
Information on LED intensity, operation times, and history logs.
Managing user settings and selecting DMX signal reception methods.
Adjusting pan/tilt reverse, feedback, mode, and EMS settings.
Configuring follow spot mode, pan/tilt limitations, and blackout behaviors.
Customizing display intensity, fan modes, and temperature units.
Adjusting dimmer curves, gobo indexing, focus tracking, and system settings.
Options to reset specific fixture modules or the entire system.
Direct control of fixture channels for manual effect manipulation.
Running test sequences and selecting dynamic or static modes.
Creating, editing, and playing user-defined programs.
Adjusting DMX values and calibrating fixture effects.
Procedures for changing gobos and measuring LED light intensity.
Explains the RDM protocol and lists supported commands for device configuration and monitoring.
Notifies when air filter cleaning is due and how to reset the timer.
Lists and describes various error messages and their probable causes.
Details how to use NFC for accessing fixture parameters via a mobile application.
Provides details on power supply, light source, color temperature, CRI, and output performance.
Lists the types and features of color wheels, CMY+CTO, and effect wheels.
Details specifications for rotating gobo wheels and prisms.
Covers iris, frost, framing shutters, zoom, strobe, dimmer, and control interface features.
Information on wireless DMX, connection types, and mounting points.
Details operating temperatures, distances, heat dissipation, IP rating, and weight.
Summarizes revisions and updates made to the user manual.
Guidelines for regular cleaning to maintain performance and light output.
Instructions for user-replaceable parts like fuses and batteries.
Specifies screw tightening order and torque for watertight cover installation.
Provides guidance on environmentally responsible disposal or recycling.
Details how DMX channels control specific fixture functions and their default values.
General| Type | Moving Head |
|---|---|
| Zoom | Yes |
| Color Wheel | Yes |
| Gobo Wheel | Yes |
| Framing Shutters | Yes |
| Pan/Tilt | 540°/270° |
| Light Source | LED |
| Effects | Animation wheel, Prism |
| Control Protocol | DMX, RDM, ArtNet, sACN |
| Power Supply | 100-240V AC, 50/60 Hz |
| Color Mixing | CMY + CTO |
To Next Page
