Robe ROBIN iForte - 10. Technical Specifications; Electrical and Optical Specifications; Color and Effect Wheel Specifications

43
10. Technical Specications
Electrical
Power supply: electronic auto-ranging
Input voltage range: 100-240V, 50-60Hz
Fuse: T 15 A
Max. power consumption: 1250W (Power factor 0.98)
Optic
Light source: TE™ 1.000W HP White LED Engine (Transferable)
Colour temperature: 6700K
CRI: 70/80/90, remotely selectable
Max. lumen output: 40.000 (goniophotometer)
Illuminance: 113.000 lx @ 5 m, min. zoom
Light source type: TE™ 1.000W HCF White LED Engine (Transferable):
Fixture total lumen output: 28.000 lm (goniophotometer)
Colour temperature output: 6.000 K
CRI: 94
Illuminance: 78.000 lx @ 5 m
LED life expectancy: min. 50.000 hours
Typical lumen maintenance: L70/B50 @ 50.000 hours
Light source warranty: 4 years or 20 000 hours
Colour wheel 1
ve dichroic lters (deep red, deep blue, orange, green, congo blue) + open
Colour wheel 2
ve dichroic lters (multicolour lter, laser green, lavender, CRI lters 80 and 90) + open
CMY + CTO mixing module
Smooth CMY colour mixing system
Variable CTO: 3000K - 6.700K
Virtual colour wheel
66 preset colours
E󰀨ect wheel
Aluminium e󰀨ect wheel rotating in both directions with variable speed
Rotating gobo wheel 1
6 glass gobos can be indexed and rotated in both directions at di󰀨erent speeds,
gobo wheel continuous rotation
Gobos: outside diameter= 30.9
+0,1
mm, image diameter=25 mm, thickness=1-3.5 mm, high
temperature borooat or better glass.
Gobos order:
Note. Metal (or aluminium) gobos cannot be used due to thermal stress.