Robe ROBIN iForte - Dimmer, Gobo, and Focus Settings

31
Dimmer Curve - Use the menu to select desired dimmer curve: Linear, Square Law or Super Square Law.
Gobo Indexing - The following three options dene transition from gobo rotation to gobo indexing.
Max. Speed & Shortcut - Gobo goes from its rotation to desired indexed position with max. speed and
via shortest track.
Follow Speed & Direction - Gobo goes from its rotation to desired indexed position with current speed
and keeps a direction of rotation.
Max. Speed & Follow Dir. - Gobo goes from its rotation to desired indexed position with max. speed
and keeps a direction of rotation.
Gobo Wheels Mode - The menu item allows you to select from two behaviours of rot. gobo wheels.
Shake - Gobos on the gobo wheel 1/2 do a shake e󰀨ect in DMX range of 60-190.
Continual - Gobos on the gobo wheel 1 and 2 do a continual positioning in DMX range of 60-190.
Note: gobo carousel cannot be stopped in position between two gobos for thermal reason, gobo always
moves to full position.
Date & Time Settings - Use this menu to set current date and time for the xture log system (menu "View
Logs"). Set this menu items before rst xture operation.
Focus Tracking - This feature provides automatic sharpness re-adjustment during zoom movement, after an
initial sharpness has been set by the operator by setting the focus channel and enabling the FocusTracking. The
Focus Tracking feature is done via automatic movement of focus element, taking into account several internal
parameters, zoom position being one of them. To utilize the Focus Tracking, make sure to enable the Focus
Tracking, set the Zoom to value 200 and adjust Focus to desired sharpness. Then, while keeping Focus value
untouched, you can move the Zoom. Fixture will automatically keep the projection at the desired sharpness
as much as possible. You can also re-adjust the Focus value over time if needed. When switching between
Gobo wheel 1, Gobo wheel 2 and an empty aperture, the Tracking Focus will adjust the internal parameters,
therefore providing desired sharpness by adjusting the Focus might be required. If you use both Gobo wheel
1 and Gobo wheel 2 without further adjusting the Focus value, Gobo wheel 2 will be automatically used for
Focus Tracking 's focusing.
Default Settings - The menu item allows to set all xture parameters in this menu to the default (factory) values
except items "DMX Input".
Password Protection - allows to enter password in order to prevent unauthorized person from changing setting
of the xture.
Reset Web Password - The menu item allows you to reset a password for access on the Web server (default
password: 2479, user: robe).
6.4 Tab "Manual Control"
Reset Functions - The menu allows to reset the xture either per function modules or all modules together.
Total System Reset - The item resets all function modules.
Pan/Tilt Reset - The item resets a pan and a tilt.
Colour System Reset - The item resets colour wheel 1/colour wheel 2 and CMY+CTO system.
Gobo/E󰀨. Wh. Reset - The item resets rotating gobo wheels and an e󰀨ect wheel.
Optics/Prism/Frost Res. - The item resets a zoom, focus, prism and a frost module.
Iris/Framing Sh. Reset - The item resets an iris module and framing shutters.
Manual E󰀨ect control - Use the menu to control all xture channels by means of the control panel.