49
13.1 Fixture watertight covers and torques of covers crews
Keep values of torques as stated on pictures below otherwise leakage
issues can occur.
Bottom base cover
16 x
h
ex socket head screw M4x14
Tightening torque: 2.2-2.5 Nm
6 x at head screw M5x18
Tightening torque: 2.5 Nm
Screws must be tightened
in the order 1-->16
17-->22.
Carefully check the gasket for signs of deformities or hardening and if it is correctly placed before
screwing the bottom base cover back.
To Next Page
Loading...
