Robe ROBIN iForte - 6.5 Stand-alone Operation Modes; Test Sequences and Modes; Program Creation and Playback

33
Rot. Gobo Wheel 1 - a carousel 1 of rotating gobos ne movement (value range: 0-255)
R. Gobo Index 1/1 - a ne movement of the rotating gobo 1 (value range: 0-255)
R. Gobo Index 1/2 - a ne movement of the rotating gobo 2 (value range: 0-255)
R. Gobo Index 1/3 - a ne movement of the rotating gobo 3 (value range: 0-255)
R. Gobo Index 1/4 - a ne movement of the rotating gobo 4 (value range: 0-255)
R. Gobo Index 1/5 - a ne movement of the rotating gobo 5 (value range: 0-255)
R. Gobo Index 1/6 - a ne movement of the rotating gobo 6 (value range: 0-255)
Rot. Gobo Wheel 2 - a carousel 2 of rotating gobos ne movement (value range: 0-255)
R. Gobo Index 2/1 - a ne movement of the rotating gobo 1 (value range: 0-255)
R. Gobo Index 2/2 - a ne movement of the rotating gobo 2 (value range: 0-255)
R. Gobo Index 2/3 - a ne movement of the rotating gobo 3 (value range: 0-255)
R. Gobo Index 2/4 - a ne movement of the rotating gobo 4 (value range: 0-255)
R. Gobo Index 2/5 - a ne movement of the rotating gobo 5 (value range: 0-255)
R. Gobo Index 2/6 - a ne movement of the rotating gobo 6 (value range: 0-255)
Colour Wheel 1 - a colour wheel 1 ne movement (value range: 0-255)
Colour Wheel 2 - a colour wheel 2 ne movement (value range: 0-255)
Prism 1 - a prism ne movement (value range: 0-255)
Prism 2 - a prism ne rotation (value range: 0-255)
Zoom - a zoom module ne movement (value range: 0-255)
Focus - a focus module ne movement (value range: 0-255)
Iris - an iris ne movement (value range: 0-255)
Frost 1/1 - a light frost ne position movement 1
Frost 1/2 - a light frost ne position movement 2
Frost 2/1 - a medium frost ne position movement 1
Frost 2/2 - a medium frost ne position movement 2
Fr. Shutters.rot- a framing shutters module ne rotation (value range: 0-255)
Fr. Shutter 1 Move - a Fram. lamella 1 ne moving
Fr. Shutter 1 Swiv. - a Fram. lamella 1 ne swivelling
Fr. Shutter 2 Move - a Fram. lamella 2 ne moving
Fr. Shutter 2 Swiv.- a Fram. lamella 2 ne swivelling
Fr. Shutter 3 Move - a Fram. lamella 3 ne moving
Fr. Shutter 3 Swiv. - a Fram. lamella 3 ne swivelling
Fr. Shutter 4 Move - a Fram. lamella 4 ne moving
Fr. Shutter 4 Swiv. - a Fram. lamella 4 ne swivelling
Calibration of the eects via the control board
1. Disconnect DMX controller from the xture and enter the "Calibrate E󰀨ects" menu.
2. Use the [up arrow] and [down arrow] to nd "Pan" and touch it to enter the ne e󰀨ect adjustment screen.
3. Set desired value and save it by touching the [conrm].
4. Repeat steps 2 and 3 for next item
5. After calibrating all e󰀨ects, touch the [conrm] to save all adjusted values and reset the xture.
Calibration of the eects via the DMX controller
1. Connect DMX controller to the xture and enter the "Calibrate E󰀨ects" menu.
Calibration protocol:
E󰀨ect Mode 1
Pan channel 55
Tilt channel 56
Ef. wheel channel 57
Rot. Gobo Wheel 1 channel 58
R. Gobo Index 1/1 channel 59
R. Gobo Index 1/2 channel 60
R. Gobo Index 1/3 channel 61
R. Gobo Index 1/4 channel 62
R. Gobo Index 1/5 channel 63
R. Gobo Index 1/6 channel 64
Rot. Gobo Wheel 2 channel 65
R. Gobo Index 2/1 channel 66
R. Gobo Index 2/2 channel 67
R. Gobo Index 2/3 channel 68
R. Gobo Index 2/4 channel 69
R. Gobo Index 2/5 channel 70