Disconnect the power supply.
Depress the magazine latch.
Pull back on the magazine cover.
Insert a strip of fasteners into
the magazine. Make sure the
staple’s crown is resting
on the magazine.
Push the magazine cover
forward until the latch catches.
Operating Instructions
AVOID BLANK SHOTS THAT COULD
SHORTEN THE TOOL’S COMPONENT LIFE.
Loading Staples
Extension Cords
Use only 12 or 14 gauge extension cords with the 10-600 Electric
Stapler. For maximum performance, use the shortest length
extension cord possible.
To Next Page
Loading...
