Roberts CR9931 - Checking Set Alarm Times; Verifying Alarm 1 and Alarm 2 Settings

Checking the Alarm Times
1. To check alarm 1 time, set the Alarm function switch to the '
1
'
position.
2. Press the ALARM/OFF button to display the alarm 1 time.
3. To check alarm 2 time, set the Alarm function switch to the '
2
'
position.
4. Press the ALARM/OFF button to display the alarm 2 time.
Note: The alarm times cannot be checked if the Alarm function
switch is in the '
1+ 2
' position.
6