13
Manual tuning - FM
1. Press the On/Off button to switch on your clock radio.
2. Press and release the Function button as needed to select the FM
waveband.
3. Fully extend the wire aerial for FM reception.
4. Repeatedly press the Tuning Up and Down buttons to tune to a
station. The frequency will change in steps of 50kHz. Pressing and
holding one of the buttons will advance the frequency selection several
times each second.
5. When the end of the waveband is reached the radio will recommence
tuning from the opposite end of the waveband.
6. Set the Volume to the desired settings.
7. To switch off your clock radio press the On/Off button.
1
2
4
4
6
7
To Next Page
Loading...
