If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
12
Operating your radio - FM
1. Carefully extend the telescopic aerial.
2. Press the On/Off button to switch on your radio. The display will show
"Roberts digital radio" for a few seconds.
3. Press the DAB/FM button to select the FM band.
4. Press the Tuning Up button and then press the Auto Tune button.
Your radio will scan in an upwards direction (low frequency to high
frequency) and stop automatically when it fi nds a station of suffi cient
strength.
5. After a few seconds the display will update and show station name.
6. Press the Tuning Down button and then press the Auto Tune button
to scan the FM band in a downwards direction (high frequency to low
frequency).
7. When the waveband end is reached your radio will recommence tuning
from the opposite waveband end.
8. Rotate the Volume control to the required setting.
9. To switch off your radio press the On/Off button.
3
2
4
6
4,6
To Next Page
Loading...
