Roberts R737 - Displaying the Time; Specifications; Circuit Features

Specifications
Power Requirements 9.0V
Batteries 6 x IEC R14 (C size)
Battery Life
Approx. 60 hrs. of listening for 4 hours a day at
normal volume using alkaline cells.
Frequency Coverage
FM 87.5 -108MHz
MW 522 - 1620kHz
LW 144 - 281kHz
Circuit Features
Loudspeaker 100mm 8 ohms
Output Power 1 watt into 8 ohms
Headphone socket 3.5mm dia
Aerial System FM Telescopic aerial
MW Built-in Ferrite aerial
LW Built-in Ferrite aerial
Displaying the time
While the radio is playing the time may be displayed by pressing the mode
button (5) once. After approximately 5 seconds the display will revert to
showing frequency.
Displaying the standby time
While the radio is playing the standby time may be displayed by pressing
the mode button (5) twice. The
STANDBY
symbol will flash in the display.
After approximately 5 seconds the display will revert to showing frequency.
With the radio switched off pressing the mode button (5) will display the
standby time. The
STANDBY
symbol will flash in the display. After approxi-
mately 5 seconds the display will revert to showing time.
The Company reserves the right to amend the specification without notice.
8
All manuals and user guides at all-guides.com