Roberts R9939 - Setting the Clock Time

7
Setting the clock time
1. Ensure that you radio is switched off.
2. When first connected to mains or batteries the display will show
"12:00"
3. Hold down the Mode button until the display begins to flash.
4. Set the hours using the Down button or turn Tuning Control to
the left.
5. Set the minutes using the Up button or turn Tuning control to the
right.
6. Press the Mode button to store the time.
Note: The clock uses the 24 hour system e.g. 2:00pm is shown as 14:00
3
5
4
6
5
4
1