Do you have a question about the Roberts R809 and is the answer not in the manual?
Shows the currently selected radio waveband (FM, LW, MW, SW).
Displays the current time or alarm time.
Indicates when the control lock function is active.
Shows that a second time zone is programmed or active.
Indicates when the sleep timer is activated.
Shows that the radio is in standby mode.
Confirms reception of an FM stereo broadcast.
Shows that a station is stored in memory.
Shows the tuned station's frequency.
Displays units like MHz or kHz for the tuned frequency.
Shows the current battery level or status.
Visualizes radio signal strength and battery condition.
Indicates the selected Shortwave (SW) band in meters.
Shows the currently selected radio waveband (FM, LW, MW, SW).
Displays the current time or alarm time.
Indicates when the control lock function is active.
Shows that a second time zone is programmed or active.
Indicates when the sleep timer is activated.
Shows that the radio is in standby mode.
Confirms reception of an FM stereo broadcast.
Shows that a station is stored in memory.
Shows the tuned station's frequency.
Displays units like MHz or kHz for the tuned frequency.
Shows the current battery level or status.
Visualizes radio signal strength and battery condition.
Indicates the selected Shortwave (SW) band in meters.
| Type | Portable Digital Radio |
|---|---|
| Display | LCD |
| FM Frequency Range | 87.5 - 108 MHz |
| DAB Frequency Range | 174 - 240 MHz |
| Battery Type | 4 x AA |
| Headphone Jack | 3.5mm |
| Power Source | Mains / Battery |
Loading...