Roberts RD4 - Adjusting Tone Settings on Roberts RD4

28
Adjusting the Tone
While the radio is in play mode the Tone button can be used to
change the tone.
The current tone is shown on the Display Screen by the Tone icon.
1. Press the Tone button to change the tone setting.
List of tone settings:
MBass
Monitor
Studio
Club
Arena
Flat
2. The next tone setting will be applied to the current station.
3. The Tone icon changes to reflect the setting.
4. Press the Tone button until the desired tone is set.
5. The Tone setting is saved when the radio is switched off. This
setting will be applied when the radio is next switched on.