Do you have a question about the Robin America EX17 and is the answer not in the manual?
Oil Capacity | 0.6 liters |
---|---|
Starting System | Recoil |
Compression Ratio | 8.5:1 |
Cooling System | Forced Air |
Ignition System | Transistorized Magneto |
Fuel Type | Unleaded gasoline |
Engine Type | 4-Stroke, Single Cylinder, OHV |
Displacement | 169 cc |
Maximum Output | 4.2 kW (5.7 HP) @ 4, 000 rpm |
Maximum Torque | 2500 rpm |
Fuel Tank Capacity | 3.6 liters |
Dry Weight | 15 kg |
Max Power | 4.2 kW (5.7 HP) @ 4, 000 rpm |
Defines maximum engine output at full throttle.
Specifies optimal output for engine longevity and fuel efficiency.
Indicates engine torque at maximum output RPM.
Provides essential guidance for safe and effective disassembly procedures.
Outlines the step-by-step process for disassembling the engine.
Details the step-by-step process for reassembling the engine.
Explains API oil grade classifications suitable for the engine.
Details SAE oil viscosity classifications based on ambient temperature.
Provides instructions for checking engine oil levels and performing oil changes.
Guides on diagnosing and inspecting the magneto for potential defects.
Explains the operational principles of the electric starter motor.
Lists specific settings and part numbers for carburetors.
Explains the operation of the float, pilot, main, and choke systems.
Provides detailed steps for disassembling and reassembling the carburetor.
Step-by-step instructions for safely disassembling the recoil starter.
Step-by-step instructions for correctly reassembling the recoil starter.
Procedures to verify the correct function of the recoil starter post-assembly.
General considerations and best practices for engine installation.
Methods for transmitting power to driven machines, including belt drive and flexible coupling.
Addresses common engine starting issues and general problems.
Identifies causes and solutions for reduced engine power output.
Lists potential causes and corrective actions for engine overheating.
Guides on diagnosing and resolving problems with the electric starter system.