Robin EC04ER - Page 13

Step lpart to remove1 Procedures I Remarks I Tool
Stop button (1) Disconnect couplers of stop button wire.
I.
12
starter
Recoil
(1 1 Remove recoil starter.
M5 X 50mm socket bolt and
washer lpce.
M5 X 22mm socket bolt with
washer
- - - 2pcs.
(1) Disassemble and
4mm
reassemble recoil
starter refering to
hexagon wrench
page 21,
"4. RECOIL
STARTER".
M5 SOCKET BOLT : Ppcs.
n
Fig. 9
- 10 -