13-5
EVERY
1000
HOURS (YEARLY) CHECKS
and
MAINTENANCE
I
Checks and Maintenance Reasons for requiring them
1
Perform overhauls, clean correct
or
replace parts.
Change piston rings.
The engine output drops and become out of order.
To
prevent from danger caused by the fuel leakage.
Replace fuel pipe once a year.
13-6
PREPARATION
for
LONG
ABEYANCE
1) Perform the above
13-1
and 13-2 maintenance jobs.
2)
Drain fuel from the fuel tank and carburetor float chamber. Drain oil from governor
or
reduction chamber.
3)
To
prevent rust in the cylinder bore, apply
oil
through the spark plug hole and turn the crankshaft several turns by
hand. Re-install the spark plug.
Turn
the starting pulley by hand and leave it where the resistance is the heaviest.
4)
Clean the engine outside with oiled cloth.
5)
Put a vinyl
or
other cover over the engine and store the engine in dry place.
-
54
-
To Next Page
Loading...
Need help?
General
