Robin EH18V OHV - Page 19

5-3 DISASSEMBLY PROCEDURES (PRO POLY) -CONTINUED
Step
(+) driver
Remove top cover from the engine.
Top cover
3
Tool
Remarks
Procedures
Part to remove
MSX 16mm tapping screw . . 2pcs.
4
lOmm box wrench
Remove recoil starter from the engine.
Recoil starter
M6 X 12mm bolt - - - - 4pcs.
5 Air cleaner
cover and
engine shroud
(with fuel
tank)
L
M6 X
(1) Remove air cleaner cover and element
M6 wing bolt
90.- 1 pce.
(2) Remove fuel pipe
from the fuel tank
(engine shroud).
(3) Remove engine shroud.
M6X 12mm
bolt .... lpce.
(4) Remove bracket (NC cover)
M6X14mm bolt
.... lpce.
M6X 14mm tapping bolt lpce.
I
lOmm box wrench
lOmm box wrench
TOP COVER TAPPING SCREW ... ~PCS.
.
RECOIL STARTER
X 12mm BOLT ... 4pcs.
AIR CLEANER COVER
14mm BOLT
... lpce. -
BRACKET (A/C cover)
m TAPPING BOLT . . . 1 pce.
- 15-