(6)
Test the operation
of
the recoil starter to see if the rope recoils satisfactorily and the ratchets
project and retract properly. Mount the recoil starter
to
the engine.
(7)
If the spring escapes from the reel when disassembling the recoil, hook the outer end of the spring
onto
the
notch
of
the reel and rewind the spring into the housing.
(8)
Lubricate the rotating parts, sliding parts and spring with heat resistant grease or mobile oil when
reassembling the recoil and prior to long term storage.
-50-
To Next Page
Loading...
