1
EN
Page
1. SAFETY PRECAUTIONS ................................................................................... 2
2. COMPONENTS .................................................................................................. 4
3. PRE-OPERATION CHECKS .............................................................................. 5
4. ELECTRIC STARTER MODELS ........................................................................ 5
5.
BELT PULLEY INSTALLATION ONTO KEYWAY-TYPE CRANKSHAFT ........................
6
6. OPERATING YOUR ENGINE............................................................................. 8
7. MAINTENANCE ................................................................................................. 9
8. PREPARATIONS FOR STORAGE ................................................................... 11
9. OIL SENSOR INSTRUCTIONS (OPTIONAL) .................................................. 11
10. EASY TROUBLESHOOTING ......................................................................... 11
11. SPECIFICATIONS .......................................................................................... 12
FOREWORD
Thank you very much for purchasing a ROBIN ENGINE.
Your ROBIN ENGINE can supply the power to operate various sorts of machines and
equipment.
Please take a moment to familiarize yourself with the proper operation and maintenance
procedures in order to maximize the safe and efficient use of this product.
Keep this owner’s manual at hand, so that you can refer to it at any time.
Due to constant efforts to improve our products, certain procedures and specifications are
subject to change without notice.
When ordering spare parts, always give us the MODEL, PRODUCTION NUMBER and SERIAL
NUMBER of your engine.
Please fill in the following blanks after checking the production number on your engine.
(Location of label is different depending on the engine specification.)
SER No.
(
Stamping
)
PROD No. / SER No.
(
Label
)
NOTICE
The engines which have emission label are allowed to be exported to USA. The emission
label placed on the engine indicates that the engine is complied with EPA (Environmental
Protection Agency) and CARB (California Air Resources Board) emission regulations in USA.
Exporting any engine to USA which does not have the emission label is a violation of EPA/
CARB emission law subject to civil penalty.
NOTE Please refer to the illustrations on the back page of the front
cover or back cover for Fig.
1 1
1 1
1 to
88
88
8 indicated in the sentence.
CONTENTS
PROD No.
SER No.
EX(GB)EU2248.pmd 06.5.13, 3:23 PMPage 1 AdobePageMaker7.0J/PPC
To Next Page
Need help?
General
